How to Perform a Time Clock Auto Test

The Time Clock Auto Test is an essential diagnostic tool used to check the functionality of your biometric device. It helps identify issues related to fingerprint sensors, keypads, and overall device performance. Follow the steps below to perform the auto test on your time clock.

Steps to Perform the Auto Test

1. Access the Main Menu

• Press the “M” button on the initial screen of the time clock device.

2. Navigate to Diagnostics

• Use the ▼ (down arrow) key to highlight “Diagnostics”.
• Press the OK button to enter the diagnostics menu.

3. Select Auto Test

• Scroll down and choose “Auto Test” from the available options.
• Press OK to proceed.

4. Run the Full Auto-Test

• Select “Test All” to start running a complete diagnostic check on the device.
• The system will automatically test various components, including the fingerprint sensor, keypad, and internal hardware.

Fingerprint Sensor Test

1. The system will automatically test the fingerprint sensor.
2. Place your finger on the sensor window to verify if it is working correctly.
3. The fingerprint image should appear on the screen.
4. If the image is clear and readable, the sensor is working properly.
5. Press ESC to exit once the test is complete.

Tip: If the fingerprint image appears blurry or does not show, clean the sensor and retest.

Need Further Assistance?

If you experience issues while running the Auto Test, contact NextGen Customer Support for troubleshooting help.

Customer Support Link: NextGen Workforce Support